Make Brother TN630 Wifi Setup Easy

Out of so many launches of Brother printers, TN630 is considered to be the best launch. It is a wireless printer which makes it easier to print from anywhere in the house. The wireless printing is a user-friendly feature that you can enjoy only if you do the Brother TN630 wifi setup. In this article, we will discuss how to do the Brother TN630 wifi setup easily and quickly. 

Before proceeding with the Brother TN630 wifi setup keep in mind to get the printer drivers on your system. Make sure you download the Brother printer drivers that are compatible with your printer model and your operating system. Also, ensure that the printer drivers software is of the latest version. You must also make sure that the wifi network is stable and active so that there is no obstruction while the setup process is ongoing. 

Prerequisites Of The Brother TN630 Wifi Setup – 

Make sure you have noted down the following things before going for the setup as you might need these during the setup;

  • Name of the Wifi network i.e. SSID
  • The password of the wifi network

Stepwise instructions To Do The Brother TNJ630 Wifi Setup Easily – 

Once you have taken care of all the points mentioned above, now you must proceed with the setup. For that, follow the steps listed below carefully; 

Step 1: The first and foremost step is to attach the power wire to the Brother TN630 printer and then plug it into the electrical wall socket.

Step 2: Now, press the power button to turn on the printer.

Step 3: Press the up and down arrow buttons to select the network option and after that press the ok button. 

Step 4: Now, look for the WLAN option by again using the up and down arrow buttons.

Step 5: To choose the Setup Wizard click on the up and down key and then tap on the OK button.

Step 6: If you observe a prompt on your screen asking, ‘Enable WLAN option?’ for that, press the OK button and enable the wifi. Now, the wireless network wizard will initiate.

Step 7: Now, your Brother TN630 will start scanning the wifi networks nearby and display the available networks on the screen. From there choose the network name of your wifi router. 

Step 8: Now, to complete the setup, download the printer drivers and software.

Step 9: Navigate to the official website of Brother printer. 

Step 10: Here, enter the printer model you are using and then enter the operating system of the device on which you are downloading the drivers. 

Step 11: Then, click on the download tab.

Step 12: After that, navigate to the Downloads folder and click on the download .exe file to run it. Once you run the file the drivers’ installation will begin.

Step 13: Finally,  follow the on-screen guidelines to complete the installation and start using the Brother TN630 wireless printer. 

Brother TN630 Wifi Setup Complete And Printer Ready To Use!Brother TN630 wifi setup

is now complete. You can enjoy wireless printing from anywhere in your home. Make sure you follow all the above-mentioned steps properly and carefully. Also, keep in mind to check the version of the printer driver you are downloading. If you come across some error while doing the Brother Tn630 wifi setup then get in touch with our technical team to get your issue resolved and complete the wifi setup.

Comments

Popular posts from this blog

How Do I Fix Canon Selphy CP1300 common Issues?

What are the Steps To Fix the ‘Epson Printer Communication Error’?

What Problems Do You Face while Using the Epson Printer? How to Fix it?