Brother TN630 Wifi Setup Explained In Easy Steps
Brother TN630 is an efficient and cost-effective printer. With Brother TN630 you can print 1200 pages on one cartridge. It is a wireless printer that allows you to connect to other devices and routers wirelessly. The Brother TN630 wifi setup is very easy and quick to perform. In this blog, we will share the steps to do Brother TN630 wifi setup effectively and enjoy printing wirelessly.
Steps To Follow For Brother TN630 Wifi Setup –
Before moving ahead with the wireless setup, make sure you have noted down the wireless network’s name and its password to connect to the wifi router. Then, follow the steps stated below to complete the Brother TN630 wifi setup;
- Firstly, connect the power wire to the brother printer and then connect it to the power supply socket.
- After that, switch on the printer by pressing the power button.
- Use the up and down arrow keys to scroll through the network options and then tap on the ok button.
- Use the up and down keys again to look for the WLAN option and then tap on the OK button.
- Select the Setup wizard option by pressing the up and down key and again tap on the OK button.
- If you see a prompt, ‘Enable WLAN’ on your display then hit the OK button and turn on your wifi network. The wireless network wizard will initiate.
- Now, your device will start searching the wifi network and display the available networks on your screen.
- When you spot the SSID or network name of your wifi network then, use the up and down keys to navigate to it and then click on the OK button.
- Some options are listed below choose one of them;
- In case you wish to use the ‘Authentication and Encryption’ method then enter the network key which it requires. After that tap on the OK button to proceed. To confirm these settings click on the Yes option.
- If the authentication method is ‘open system’ and you have not chosen the ‘encryption mode’ move ahead with the next step.
- This way, your Brother printer will try to link to the wifi network.
- Now, you must download the printer driver software of your Brother printer.
- For that, go to the Brother printer’s official website and enter your printer’s model name and number.
- Then, enter the operating system on which you will be downloading the printer drivers.
- After that click on the download button and then just follow the on-screen guidelines to complete the wifi setup.
Brother TN630 Ready To Use!
Your Brother TN630 wifi setup will be complete after following the steps listed above carefully. You need to ensure there is a proper power supply with no irregularities and that the wifi network is working just fine and stable to avoid poor network connection breaking the wifi setup process. You can print wirelessly from any area of the home or small office space after the Brother TN630 wifi setup is complete.
Comments
Post a Comment